December 22

20171220_175353

“Seeing is believing, but sometimes the most real things in the world are the things we can’t see” – Conductor, The Polar Express

20171220_172747.jpg

Start with a small rectangular scrap.

20171220_172920.jpg

Cut pieces from the corners to scoop out the edges.

20171220_173159.jpg

Write or print on another piece of paper so you can trace with a hole poker. 

20171220_173621.jpg

Start poking. I used a very large safety pin on top of a mouse pad.

20171220_173945.jpg

Using a smaller pin or needle, poke around the edges as a border. 

20171220_174233.jpg

Clean up the larger holes if needed by re poking and flattening the hole flaps in the back. 

Add your ribbon and hang! Make tickets for each word if you’d like.  And always, always believe.

December 21

20171220_175418

From wreath to igloo! Just like the paper ball wreaths, this is just a stacked version. With a little door.

20171220_152039.jpg

Put on a movie! This one takes a little longer.

20171220_143826.jpg

Cut up strips. A ton of them. Probably a page and a half. These are cut at 1/4″ strips on the 8.5″ side. Then tear them in half and ball up tightly.

20171220_145151.jpg

Trace a small circle like a cup or a small candle. 

20171220_145452.jpg

Add a little door block and cut out.

20171220_150215.jpg

Start gluing. 

20171220_154011.jpg

And gluing. Stacking like bricks as you go. Slowly start to push the balls in the higher you get so it domes. 

20171220_161801.jpg

Glue and dome. Leave the door for last.

20171220_163207.jpg

Once you’re about here, start on the door.

20171220_171451.jpg

Put on another movie if needed…

20171220_163709.jpg

Start with about 2 deep and 2 straight up. 

20171220_170817.jpg

Angle the next row then top with one. 

20171220_171217.jpg

Now start filling in the rest of the roof. 

20171220_172541.jpg

Floof around if you have some gaps. Add your ribbon and hang!

This would be so pretty around the blue bulbs if you have colored lights. It would also be pretty without a base and with a faux tealight underneath! My husband pointed out I didn’t put anything inside and well, I forgot. So I’ll find an army man or dinosaur to put in there. Hope you enjoyed snow balling!

December 15

20171214_182449

20171214_164609.jpg

Cut a sheet of paper into strips. These are 3/4″ strips. 

20171214_181204.jpg

Stack the strips and fold in half. Glue or staple the fold in place. If gluing, use a small amount just in the center. 

20171214_181711.jpg

Add a dab of glue to the end of each strip and loop to the center. Hot glue, glue stick or double sided tape will work best. 

20171214_182340.jpg

Loop and glue until all strips are looped and glued. 

So easy! Try with shorter strips, thinner strips, colors and ribbons. Perfect for the tree or on top of a gift!

December 11

20171210_134938

Small strips of paper turned into curly and cute garland!

20171210_131320.jpg

Cut strips of paper into equal widths. 

20171210_132958.jpg

Curl into a variety of spirals differing in tightness. 

20171210_133230.jpg

Arrange with alternating sizes and glue together. 

Just three steps for this simple and whimsical addition to your tree! Have fun with colors, sizes and textured papers!

December 9

Mini advent cubes for your tree! The perfect size for a mini toy or treat. This was another hand drawn template but I’ve created one for you to print and fold on your own.

20171208_130208.jpg


Cut out your template.

20171208_130810.jpg


Cut along solid lines and fold on dotted lines. Decorate your own number as you wish.

20171208_131533.jpg


Glue together and add your treat!

Add a dollop of hot glue at the top and glue on your ribbon to hang.

 

Here is the template to create your own! Fold with the guidelines facing in.

Advent Box

December 8

20171207_181418

Another craft for those left over strips!

20171207_154812.jpg

Thick strips work best. It’s ok if the edges aren’t perfect. 

20171207_154929.jpg

Start rolling the strips leaving a little hole in the center. About halfway down a pencil tip. You’ll need to be able to fit one side of scissors in there. 

20171207_155005.jpg

Tape your roll closer to one end. 

20171207_155116.jpg

Insert one side of the scissors in the center and start making cuts down the roll. About 3/4 of the way down the roll. 

20171207_155200.jpg

20171207_155253.jpg

This was a rather thick one so I started with 4 cuts. You can make more as you start floofing out the pieces. 

20171207_155453.jpg

Start curling from the bottom using your nail, rolling on a pen or with the side of scissors. Keep taking a piece or two at a time and curling and flaring out. 

20171207_160209.jpg

Cut larger pieces to flare out easier and to fluff it up some more. 

And that’s all!

20171207_181418.jpg

Your pom pom is ready for the tree. 

December 7

20171206_162701

Happy one week of ornaments! Today is one of my favorites and so easy. The cutting is the only tedious part so put on a movie if you are making a bunch! You can Google or YouTube how to make these and for free templates. I’m sure missing my printer right now, I had to trace off of my laptop – it’s a touch screen so tracing was… touchy. Ha.

b4e674bdc96962322c569785329c838f (1)

This is the template I found on Google and Pinterest. I wasn’t able to find the original and the logo is a little fuzzy. Let me know if you know the original author!

It helps to print your template on cardstock then use that to trace onto paper.

20171206_161816.jpg

Cut out.

20171206_162159.jpg

Fold centers. The smallest ones you can just push an edge or your nail in the center.

20171206_162301.jpg

Put a dab of glue in the center of the largest one and place the 2nd largest on top so it’s fanned between petals. 

20171206_162518.jpg

Keep gluing and placing leaves on from largest to smallest and rotating so it’s fanned out. You can curl the tips a little down if you want to fluff it up a little more as well. 

And there you have it! Make 1 or 100! Last year, I made a wreath for my office with logo paper I made.

IMG_20161127_133746

December 5

20171204_160808

From diamonds to snowflakes, these are simple, dimensional and elegant. Try in a variety of sizes for both separate diamonds and to make a full snowflake.

20171204_145950.jpg

Fold an 8.5×11 sheet of paper to create a square.

20171204_150112.jpg

Cut off extra bit.

20171204_150328.jpg

Fold the square into quarters. (lines only drawn for reference)

20171204_150416.jpg

Cut along fold lines into smaller squares.

20171204_150557.jpg

Fold each square in half to make a triangle. You will cut from the folded side of the paper towards the center careful not to cut all the way to the center. Cut along dotted lines and keep solid line intact.

20171204_150659.jpg

20171204_150730.jpg

Once open, it should look like this,

20171204_150815.jpg

Fold the center towards you and glue together.

20171204_160323.jpg

Flip over.

20171204_160359.jpg

Take the next row and glue those together.

20171204_160443.jpg

Flip over. Glue the last two pieces together. That’s it for just a 3D Diamond! Continue reading to learn how to make into a snowflake.

20171204_163131.jpg

Make 5 more diamonds to have a total of 6 diamonds. First, glue two diamonds together at the bottom. 

20171204_182341

Glue one more diamond onto the two. Repeat to make another set of 3. 

20171204_182437.jpg

Put a bit of glue on the center and pinch together. 

20171204_182503.jpg

Your snowflake is now complete! These look great in different colors and sizes. Let it snow! 

December 4

20171203_195623.jpg

By now, you’ve made a couple of ornaments and may have some scrap paper. You’ve made these probably with straw wrappers, while in class, while you’re on a conference call… anyway, they are a super simple folded piece of ART. They are the original fidget toy. Bask in the glory of simplicity and not wasting a scrap of paper. If you haven’t made one of these, the steps are simple and below:

20171203_193805.jpg

Strips of scrap. Any size and width will do and it’s okay if they are a little beat up. It adds character.

20171203_193828.jpg

It helps to add a touch of glue to the starting corner.

20171203_193925.jpg

Start folding the pieces evenly on top of each other.

20171203_194002.jpg

folding….

20171203_193943.jpg

folding…

20171203_194155.jpg

And fold until you can’t fold anymore. Trim off any excess and glue the top bits in place.

So simple, so satisfying. And it eats up any scraps you may have! It’s like amped up tinsel! Try in different widths, lengths and with more than two pieces!